LED Lighting Kit (Press-Fit)

This LED strip system for acoustic wall panels is designed for quick, clean installation between the wooden slats of acoustic panels.

The LED strip features a 3M adhesive backing, allowing it to be mounted directly onto the felt backing of the acoustic panel. No drilling, screws, or separate mounting brackets are required.

After attaching the LED strip, the supplied light diffuser covers are pressed into the gap between the wooden slats. The covers create a clean, finished appearance and help diffuse the light into a smooth, warm glow.

The covers are suitable for acoustic panels with a gap width of approximately 10–15 mm. They are approximately 12 mm high. Depending on the depth of your wooden slats, the covers may sit completely recessed between the slats or protrude slightly on panels with particularly shallow slats.

Installation takes only around two minutes, making this an easy way to add integrated lighting to an existing acoustic panel wall.

How do you install the LED strips?

1. Position the LED strip – Decide where you want the illuminated line to run between the wooden slats.
2. Remove the adhesive liner – Peel the protective film from the 3M adhesive backing.
3. Attach to the felt – Press the adhesive side of the LED strip firmly onto the felt backing between the wooden slats.
4. Install the covers – Press the diffuser covers into the gap and slide the individual sections together until you have created one clean, continuous line.
5. Route the USB cable – Connect the USB cable and guide it through the acoustic panel if required. The cable can be routed toward either the top or bottom of the panel wall for a discreet installation.
6. Switch on the lighting – Connect the USB power supply and enjoy the warm, integrated lighting effect.

Benefits

• Designed specifically for acoustic slat wall panels
• Suitable for gaps from 10 to 15 mm
• Fast installation 
• 3M self-adhesive backing – simply peel and press onto the felt
• No drilling, screws, or glue required
• Supplied diffuser covers create a clean, finished light line
• Covers can be connected together to create one continuous row
• Approximately 12 mm high
• Can sit recessed between deeper wooden slats
• May protrude slightly on panels with very shallow slats
• USB-powered for easy installation
• USB cable can be routed discreetly through the top or bottom of the acoustic panel

Specifications

• Application: Acoustic wooden slat wall panels
• Compatible gap width: 10–15 mm
• Cover height: Approx. 12 mm
• LED strip mounting: 3M self-adhesive backing
• Cover installation: Press-fit between the wooden slats
• Power connection: USB
• Installation time: Approx. 2 minutes
• Installation method: No drilling or screws required

Clean integrated lighting

The combination of the self-adhesive LED strip and separate diffuser covers makes it possible to add lighting to an acoustic wall without permanently modifying the wooden slats. Once installed, the covers form a neat vertical light line that looks like an integrated part of the acoustic panel rather than an LED strip added afterwards.